Pro Woodworking Tips.com

Table Saw Cross Cut Sled Plan 

Cross Cut Sled For The  Table Saw 

Click here to open:  Cross Cut Sled Plan 

Provided By Bobs Plans.com

Robert E. Reedy, owner of Bob's Plans. com, has allowed us to share a terrific cross cut sled with you. This is about the finest cross cut sled I have seen. While it's not overly complicated to make, it will provide you supreme accuracy for years to come.

Using readily available parts, Bob has come up with a perfect cross cut sled, which makes most others seem prehistoric, or at least outdated.

It provides for use as a taper jig, for making any type of tapered cuts, or act as a very accurate miter gage, capable of safely cutting small pieces.

Cutting Tapers

Safely Cut Small Pieces

This really is a must have jig. You will find yourself using it over and over!

A VERY BIG THANK YOU TO BOB FOR ALLOWING US TO SHARE THIS WITH YOU!

17-Piece Universal T-Track Kit

Outfit your workbenches, jigs, or machine tables with the ultimate accessory track! Universal T-Track boasts a unique stacked-slot design that allows you to attach any accessory with 1/4" T-bolts, 5/16" T-bolts, or 1/4" Hex-bolts. With this full-service kit you get: One 4' length of Universal T-Track Two 3-1/2" x 5/16" T-bolts Two 1" x 5/16" T-bolts Two 1-1/2" x 5/16" T-bolts Two 2-1/2" x 5/16" T-bolts Four T-knobs Four 5-star knobs Additional lengths of track are sold separately, below.  17-Piece Universal T-Track Kit

Aluminum T-Track

Get maximum strength when you use this T-Track with our T-bolt system. Works with router table, drill press tables, band saw tables, and workbenches. Ideal for use with custom jigs and fixtures!Available in 1/2'' depth or 3/8'' depth for thinner stock. 3/4'' Wide. See also our Intersection T-Track Kits. Used with our 3/4" wide aluminum T-track, this 4-piece kit allows you to make the T-track intersection you need.  Aluminum T-Track

Or, if you prefer to buy a similar, but not nearly as useful cross cut jig, Rockler has one.

Table Saw Crosscut Sled

No more squinting at those tiny scales! This Crosscut Sled features a large protractor scale way out at the end of the fence, allowing you to precisely tune your angles for air-tight miters and crosscuts. Easy-to-read 1/2° graduations and a hair-line indicator ensure error-free setups. Spacious MDF surface works perfect for crosscutting large panels, while self-adhesive low-friction tape allows easy sliding. Heavy-duty aluminum fence features an adjustable MDF face and a sliding flip-down stop. An aluminum hold-down slides along a separate slot to prevent material from shifting during the cut. Spring-loaded ball bearings in the miter bar are adjustable for a no-slop fit to the track and smooth, accurate cuts.  Table Saw Crosscut Sled

Return to Table Saw Index